Category Archives: Switching

CWS023-024
Channel switcher for Fender Super Bassman. Removable 1/4″ cable on left side. Dual LEDs correspond with the channels on the amp. Powered by 9V battery or external 9V (power not required for operation). This mini pedal board was constructed for

CWS023-024
Channel switcher for Fender Super Bassman. Removable 1/4″ cable on left side. Dual LEDs correspond with the channels on the amp. Powered by 9V battery or external 9V (power not required for operation). This mini pedal board was constructed for

CWS022 – Dual Mute
The Dual mute independently mutes two signals which pass through it. When the LED is on, the signal passes unaffected. Switching either side of the effect will mute the signal and turn off the LED.

CWS022 – Dual Mute
The Dual mute independently mutes two signals which pass through it. When the LED is on, the signal passes unaffected. Switching either side of the effect will mute the signal and turn off the LED.

CWS015 – Dual Momentary Footswitch
Two button footswitch with TRS jack. This pedal uses momentary switches to select up/down settings on a jamman loop pedal. It is a smaller version of the FS3X schematic with the exclusion of the mode switch. Here is the switcher

CWS015 – Dual Momentary Footswitch
Two button footswitch with TRS jack. This pedal uses momentary switches to select up/down settings on a jamman loop pedal. It is a smaller version of the FS3X schematic with the exclusion of the mode switch. Here is the switcher

CWS011 – AB Amp Switcher
AB amp channel switcher built for live use with green (CH1) and red (CH2) LEDs. The switch will also work with any equipment that requires a TS connection using the channel 1 output.

CWS011 – AB Amp Switcher
AB amp channel switcher built for live use with green (CH1) and red (CH2) LEDs. The switch will also work with any equipment that requires a TS connection using the channel 1 output.

CWS010
Momentary A/B switch for switching two inputs to one output. This pedal was built specifically to switch a microcassette player into the signal path when the switch on the pedal was held down. This pedal was built for and used

CWS010
Momentary A/B switch for switching two inputs to one output. This pedal was built specifically to switch a microcassette player into the signal path when the switch on the pedal was held down. This pedal was built for and used