Posts Tagged: chad morgan-sterenberg
CWS020 – PTP Boost
This pedal was my first attempt at building something point to point on turret strip. I started making this boost without a plan or a diagram, and was pretty amazed at how nicely everything fit together. Sprague Orange Drop capacitors
CWS020 – PTP Boost
This pedal was my first attempt at building something point to point on turret strip. I started making this boost without a plan or a diagram, and was pretty amazed at how nicely everything fit together. Sprague Orange Drop capacitors
CWS017-019
These three pedals were built as refinement to the concept in CWS016. The main circuit is the same as found in CWS008, with the addition of a switch that controls a large or small boost in the bass frequencies. The
CWS017-019
These three pedals were built as refinement to the concept in CWS016. The main circuit is the same as found in CWS008, with the addition of a switch that controls a large or small boost in the bass frequencies. The
CWS016
Boost pedal with modified tone section. The capacitors were selected from extended use with CWS008, to be the exact same circuit when the pedal was in its most utilized setting. From this starting point, CWS016 is able to reduce (or
CWS015 – Dual Momentary Footswitch
Two button footswitch with TRS jack. This pedal uses momentary switches to select up/down settings on a jamman loop pedal. It is a smaller version of the FS3X schematic with the exclusion of the mode switch. Here is the switcher
CWS015 – Dual Momentary Footswitch
Two button footswitch with TRS jack. This pedal uses momentary switches to select up/down settings on a jamman loop pedal. It is a smaller version of the FS3X schematic with the exclusion of the mode switch. Here is the switcher
CWS013 – Flute Filter Fuzz
This pedal has been in the works for a long time. I suppose the story starts years ago when I scavenged an old roadside Gulbransen organ, thrilled to find it overflowing with nice reusable poly caps, resistors, switches, pots, wire, and
CWS013 – Flute Filter Fuzz
This pedal has been in the works for a long time. I suppose the story starts years ago when I scavenged an old roadside Gulbransen organ, thrilled to find it overflowing with nice reusable poly caps, resistors, switches, pots, wire, and
CWS012 – Brazil Tremolo
This pedal was created against all odds, in the back lounge of a Prevost nightliner between Chicago and Seattle, then flown to Brazil where it was placed in the hands of its new owner. I do so few commissions, that
CWS012 – Brazil Tremolo
This pedal was created against all odds, in the back lounge of a Prevost nightliner between Chicago and Seattle, then flown to Brazil where it was placed in the hands of its new owner. I do so few commissions, that
CWS011 – AB Amp Switcher
AB amp channel switcher built for live use with green (CH1) and red (CH2) LEDs. The switch will also work with any equipment that requires a TS connection using the channel 1 output.
CWS011 – AB Amp Switcher
AB amp channel switcher built for live use with green (CH1) and red (CH2) LEDs. The switch will also work with any equipment that requires a TS connection using the channel 1 output.
Project 002 – Pedal board build
I have a habit of tearing apart and rearranging my pedal board for just about every tour that I go on. Earlier this year, I had switched the entire board over to a 6-channel true bypass strip and ran all
Project 002 – Pedal board build
I have a habit of tearing apart and rearranging my pedal board for just about every tour that I go on. Earlier this year, I had switched the entire board over to a 6-channel true bypass strip and ran all
CWS010
Momentary A/B switch for switching two inputs to one output. This pedal was built specifically to switch a microcassette player into the signal path when the switch on the pedal was held down. This pedal was built for and used
CWS010
Momentary A/B switch for switching two inputs to one output. This pedal was built specifically to switch a microcassette player into the signal path when the switch on the pedal was held down. This pedal was built for and used
CWS009 – Tremolo
Tremolo pedal based off of the Electronics Australia circuit. This pedal was made for Mike York of Pianos Become the Teeth. I thought I would post some process pictures as I’ve never really done that before. The enclosure was machined,
CWS009 – Tremolo
Tremolo pedal based off of the Electronics Australia circuit. This pedal was made for Mike York of Pianos Become the Teeth. I thought I would post some process pictures as I’ve never really done that before. The enclosure was machined,
Oats and Molasses 