Posts Tagged: electronics

CWS016
Boost pedal with modified tone section. The capacitors were selected from extended use with CWS008, to be the exact same circuit when the pedal was in its most utilized setting. From this starting point, CWS016 is able to reduce (or

CWS015 – Dual Momentary Footswitch
Two button footswitch with TRS jack. This pedal uses momentary switches to select up/down settings on a jamman loop pedal. It is a smaller version of the FS3X schematic with the exclusion of the mode switch. Here is the switcher

CWS015 – Dual Momentary Footswitch
Two button footswitch with TRS jack. This pedal uses momentary switches to select up/down settings on a jamman loop pedal. It is a smaller version of the FS3X schematic with the exclusion of the mode switch. Here is the switcher

CWS014 – Tremolo Optical mod
Another tremolo based on the circuits found in CWS006, CWS007, CWS009, and CWS012. This circuit was modded with two switches, one to bring in extra depth, and another that switches in an optical component. A NOS photoresistor was used in

CWS014 – Tremolo Optical mod
Another tremolo based on the circuits found in CWS006, CWS007, CWS009, and CWS012. This circuit was modded with two switches, one to bring in extra depth, and another that switches in an optical component. A NOS photoresistor was used in

CWS013 – Flute Filter Fuzz
This pedal has been in the works for a long time. I suppose the story starts years ago when I scavengedĀ an old roadside Gulbransen organ, thrilled to find it overflowing with nice reusable poly caps, resistors, switches, pots, wire, and

CWS013 – Flute Filter Fuzz
This pedal has been in the works for a long time. I suppose the story starts years ago when I scavengedĀ an old roadside Gulbransen organ, thrilled to find it overflowing with nice reusable poly caps, resistors, switches, pots, wire, and

CWS012 – Brazil Tremolo
This pedal was created against all odds, in the back lounge of a Prevost nightliner between Chicago and Seattle, then flown to Brazil where it was placed in the hands of its new owner. I do so few commissions, that

CWS012 – Brazil Tremolo
This pedal was created against all odds, in the back lounge of a Prevost nightliner between Chicago and Seattle, then flown to Brazil where it was placed in the hands of its new owner. I do so few commissions, that

Project 002 – Pedal board build
I have a habit of tearing apart and rearranging my pedal board for just about every tour that I go on. Earlier this year, I had switched the entire board over to a 6-channel true bypass strip and ran all

Project 002 – Pedal board build
I have a habit of tearing apart and rearranging my pedal board for just about every tour that I go on. Earlier this year, I had switched the entire board over to a 6-channel true bypass strip and ran all

Project 001 – Fixing an old (Boss) power supply
If you’re like me, you have a whole bunch of these kinds of power supplies all mangled up and lying broken in a box or tossed in a drawer somewhere. Instead of throwing them out and buying a new one,

Project 001 – Fixing an old (Boss) power supply
If you’re like me, you have a whole bunch of these kinds of power supplies all mangled up and lying broken in a box or tossed in a drawer somewhere. Instead of throwing them out and buying a new one,