Posts Tagged: guitar pedal
CWS079-082 – dual boost
Batch of 4 dual boost pedals, OAM VB-1 on the left, OAM Panorama on the right. These have a single input and output and a shared 9V power jack. An amber LED was used on the Panorama side, and a
CWS079-082 – dual boost
Batch of 4 dual boost pedals, OAM VB-1 on the left, OAM Panorama on the right. These have a single input and output and a shared 9V power jack. An amber LED was used on the Panorama side, and a
CWS058-063
This was the first batch of OAM VB-1, a newer boost circuit that I was working on, which was offered to those who had already purchased an OAM Panorama. The VB-1 is a bassier, fuzzier single transistor circuit which has
CWS058-063
This was the first batch of OAM VB-1, a newer boost circuit that I was working on, which was offered to those who had already purchased an OAM Panorama. The VB-1 is a bassier, fuzzier single transistor circuit which has
CWS049-057
Batch of 8+1 OAM Panorama boost pedals. CWS049 – brushed case, bass switch, black knobsCWS050 – brushed case, bass switch, black knobsCWS051 – brushed top, white sides, bass switch, oxblood knobsCWS052 – brushed case, bass switch, black knobsCWS053 – brushed
CWS049-057
Batch of 8+1 OAM Panorama boost pedals. CWS049 – brushed case, bass switch, black knobsCWS050 – brushed case, bass switch, black knobsCWS051 – brushed top, white sides, bass switch, oxblood knobsCWS052 – brushed case, bass switch, black knobsCWS053 – brushed
CWS046-047 – dual boost
CWS047 was the first production dual boost custom built for Evan Weiss of Into It Over It. It featured a brushed aluminum case, oxblood knobs, and amber (OAM Panorama) and pink (OAM VB-1) LEDs. CWS046 was built as a prototype
CWS046-047 – dual boost
CWS047 was the first production dual boost custom built for Evan Weiss of Into It Over It. It featured a brushed aluminum case, oxblood knobs, and amber (OAM Panorama) and pink (OAM VB-1) LEDs. CWS046 was built as a prototype
CWS025
This boost was made for Arun Bali of Saves the Day. It was constructed in a similar fashion to the boosts CWS017-019, but with a bass switch on the top of the case which switches between flat (down), tight (center),
CWS023-024
Channel switcher for Fender Super Bassman. Removable 1/4″ cable on left side. Dual LEDs correspond with the channels on the amp. Powered by 9V battery or external 9V (power not required for operation). This mini pedal board was constructed for
CWS023-024
Channel switcher for Fender Super Bassman. Removable 1/4″ cable on left side. Dual LEDs correspond with the channels on the amp. Powered by 9V battery or external 9V (power not required for operation). This mini pedal board was constructed for
CWS022 – Dual Mute
The Dual mute independently mutes two signals which pass through it. When the LED is on, the signal passes unaffected. Switching either side of the effect will mute the signal and turn off the LED.
CWS022 – Dual Mute
The Dual mute independently mutes two signals which pass through it. When the LED is on, the signal passes unaffected. Switching either side of the effect will mute the signal and turn off the LED.
CWS016
Boost pedal with modified tone section. The capacitors were selected from extended use with CWS008, to be the exact same circuit when the pedal was in its most utilized setting. From this starting point, CWS016 is able to reduce (or
CWS013 – Flute Filter Fuzz
This pedal has been in the works for a long time. I suppose the story starts years ago when I scavenged an old roadside Gulbransen organ, thrilled to find it overflowing with nice reusable poly caps, resistors, switches, pots, wire, and
CWS013 – Flute Filter Fuzz
This pedal has been in the works for a long time. I suppose the story starts years ago when I scavenged an old roadside Gulbransen organ, thrilled to find it overflowing with nice reusable poly caps, resistors, switches, pots, wire, and
CWS012 – Brazil Tremolo
This pedal was created against all odds, in the back lounge of a Prevost nightliner between Chicago and Seattle, then flown to Brazil where it was placed in the hands of its new owner. I do so few commissions, that
CWS012 – Brazil Tremolo
This pedal was created against all odds, in the back lounge of a Prevost nightliner between Chicago and Seattle, then flown to Brazil where it was placed in the hands of its new owner. I do so few commissions, that
Oats and Molasses 